moon Posted January 20, 2017 Share Posted January 20, 2017 Szybkość pomiaru? Wysłane z mojego D6603 przy użyciu Tapatalka Quote Link to comment Share on other sites More sharing options...
Skajo Posted January 21, 2017 Share Posted January 21, 2017 2-3 sekundy z tego co czytałem. Quote Link to comment Share on other sites More sharing options...
Maryh Posted January 21, 2017 Share Posted January 21, 2017 Aż taki szybki to nie jest Z praktyki - około 10 sek. do pełnego ustabilizowania pomiaru, jeśli zanurzamy zimną sondę. Jeśli jest zamontowana na stałe to reaguje na bieżąco. Quote Link to comment Share on other sites More sharing options...
Skajo Posted January 21, 2017 Share Posted January 21, 2017 temperature readings in under 4 seconds - to z opisu aukcji https://thermapen.co.uk/superfast-thermapen-3/1-classic-superfast-thermapen-3-thermometer.html- strona producenta Osobiście nie używałem, dopiero idzie. Widocznie troszkę przekłamuje producent ? Quote Link to comment Share on other sites More sharing options...
PiwoLab Posted January 21, 2017 Share Posted January 21, 2017 (edited) Nikt nie przekłamuje, tylko mówicie o dwóch różnych termometrach - 3 sekundy thermapen, ok. 10 sekund ST80. EDIT: Dla zainteresowanych załączam certyfikat kalibracji thermapena. Aktualny link certyfikat.pdf Edited January 31, 2017 by PiwoLab Quote Link to comment Share on other sites More sharing options...
Miroon86 Posted January 21, 2017 Share Posted January 21, 2017 Panowie założycie oddzielny temat. Quote Link to comment Share on other sites More sharing options...
Dario63 Posted January 23, 2017 Share Posted January 23, 2017 Sprzedam kegi,mój sprzęt polecam. https://www.olx.pl/oferta/kegi-20litrow-2-sztuki-plus-nalewak-CID619-IDjTI2z.html Quote Link to comment Share on other sites More sharing options...
Michal_87 Posted January 23, 2017 Share Posted January 23, 2017 Sprzedam kegi,mój sprzęt polecam. https://www.olx.pl/oferta/kegi-20litrow-2-sztuki-plus-nalewak-CID619-IDjTI2z.html Chyba nie ten dzial Quote Link to comment Share on other sites More sharing options...
lookasoo Posted January 25, 2017 Share Posted January 25, 2017 Znalezione dzisiaj, może kogoś zainteresuje https://www.olx.pl/oferta/duzy-garnek-emaliowany-CID628-IDjWzHJ.html Wysłane z mojego D6633 przy użyciu Tapatalka Quote Link to comment Share on other sites More sharing options...
Enethion Posted January 25, 2017 Share Posted January 25, 2017 Znalezione dzisiaj, może kogoś zainteresuje https://www.olx.pl/oferta/duzy-garnek-emaliowany-CID628-IDjWzHJ.html Wysłane z mojego D6633 przy użyciu Tapatalka Na podstawie rozmiarów stwierdzam, że sprzedający się nie myli. Pojemność użytkowa ("do ucha"): 30 litrów Pojemność do pełna: 35 litrów Chwilowo wyczerpałem budżet na sprzęt, ale oferta kusząca. Wysłane z Rivendell przy użyciu Palantíru Quote Link to comment Share on other sites More sharing options...
darinho Posted January 25, 2017 Share Posted January 25, 2017 Śrutownik Porkert 90 zł https://www.olx.pl/oferta/srutownik-srutownica-porkert-piwo-CID628-IDjRRXh.html#5f2aad6a72 Quote Link to comment Share on other sites More sharing options...
PiwoLab Posted January 25, 2017 Share Posted January 25, 2017 KLARSTEIN MUNDSCHENK KOCIOŁ ZACIEROWY ZESTAW DO WARZENIA PIWA 2500W 30L STAL NIERDZEWNA Cena: 1553,99 zł Quote Link to comment Share on other sites More sharing options...
ThoriN Posted January 26, 2017 Share Posted January 26, 2017 (edited) Kociołek Lidlowy za 90zł:https://www.olx.pl/oferta/garnek-elektryczny-xxxl-CID628-IDjUD0B.html#57b4f35a55 Nie wiem, nie znam - znalazłem przy okazji szukania gara dla siebie. EDIT: Ajj, już nieaktualne No cóż - cena promocyjna, to nie będzie stał wiecznie Edited January 26, 2017 by ThoriN Quote Link to comment Share on other sites More sharing options...
Lelot Posted January 27, 2017 Share Posted January 27, 2017 Po paru latach milczącej obecności na forum wypada się przywitać, więc na dzień dobry takie oto znalezione w sieci: Garnek z nierdzewki 35l ~2 razy taniej niż zwykle, sam się skusiłem. O grubym dnie raczej można zapomnieć, ale dobra opcja dla tych co nie chcą w emalię. http://allegro.pl/garnek-nierdzewny-stock-pot-35-l-i6683883938.html Z obliczeń wynika, że roboczo bez problemu wejdzie 30l, więc na standardową warkę 25l w zupełności wystarczy. Quote Link to comment Share on other sites More sharing options...
cen16 Posted January 27, 2017 Share Posted January 27, 2017 Za niecałe 30 zł więcej jest 50 L http://allegro.pl/garnek-nierdzewny-stock-pot-50-l-i6695040458.html Quote Link to comment Share on other sites More sharing options...
Zenon Wisnia Posted January 27, 2017 Share Posted January 27, 2017 Za niecałe 30 zł więcej jest 50 L http://allegro.pl/garnek-nierdzewny-stock-pot-50-l-i6695040458.html Byłaby alternatywa dla kega. Ja myślę nad 70L, ale poczekam na opinie. Quote Link to comment Share on other sites More sharing options...
jac007 Posted January 27, 2017 Share Posted January 27, 2017 Garnek 50 l waży 3,5kg tragedia lepiej przerobić kega. Quote Link to comment Share on other sites More sharing options...
ASadam Posted January 27, 2017 Share Posted January 27, 2017 (edited) Tylko ścianki trochę cienkie. Przy wielkości garnka 70l 45x45cm powierzchnia ścianek to niecałe 0,8m2. Waga 4,4kg/0,8=5,5kg/m2 to da ok. 0,7mm grubości ścianki. Jednak tak czy inaczej oferta godna uwagi i trzeba by sprawdzić. Edited January 27, 2017 by ASadam Quote Link to comment Share on other sites More sharing options...
PiwoLab Posted January 27, 2017 Share Posted January 27, 2017 A pokrywę uwzględniłeś? Quote Link to comment Share on other sites More sharing options...
Michal_87 Posted January 27, 2017 Share Posted January 27, 2017 Wydaje mi się, że im garnek cięższy tym lepszy. Czy moze sie myle? Quote Link to comment Share on other sites More sharing options...
ASadam Posted January 27, 2017 Share Posted January 27, 2017 Jeśli waga z pokrywą, to będzie ok.0,95m2 czyli 4,4/0,95=4,6kg/m2 czyli ok. 0,6mm grubości Quote Link to comment Share on other sites More sharing options...
marekm Posted January 27, 2017 Share Posted January 27, 2017 na fermentory moze dobre.. Quote Link to comment Share on other sites More sharing options...
jaras Posted January 27, 2017 Share Posted January 27, 2017 (edited) przecież w aukcji jest waga razem z opakowaniem 3,45kg. ale z tym fermentorem to może i niegłupi pomysł - może ktoś z Poznania ma za dużo czasu? edit: nie nadaje się do indukcji więc dno pewnie cienkie jak i ścianki Edited January 27, 2017 by jaras Quote Link to comment Share on other sites More sharing options...
Petee Posted January 27, 2017 Share Posted January 27, 2017 Posiadam dwa takie garnki - 6 i 10L. Używam ich do grzania wody (i rosołu ) do niczego więcej się nie nadają. Quote Link to comment Share on other sites More sharing options...
PiwoLab Posted January 28, 2017 Share Posted January 28, 2017 No trochę cienkie ścianki, ale bez przesady. Do budżetowego wykorzystania garnki mogą się nadać. Uzbroi się je przykładowo w fałszywe dno, zawory, płynowskaz, grzałkę, nawet silnik z mieszadłem, ... itd. Czyli w to co potrzebne do danego systemu. Ciężar na tyle się zwiększy, że będą stabilne. Od 3 lat mam 3 gary z niewiele grubszą ścianką i nic im się nie stało. Na fermentor potrzebna by była jedynie uszczelka i jeszcze jakieś klamry. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.